Advanced Search

Indexed by SCI、CA、РЖ、PA、CSA、ZR、etc .

Volume 36 Issue 1
Feb 2025
Turn off MathJax
Article Contents
Donghua Su, Sheng Huang, Zaoyuan Li, Jin Li, Ziyu Wang, Shizhong Tang, Hua Wu, Bo Zhao. Sealing Integrity Evaluation and Optimization of Cement Sheath-Formation Interface under Different Formation Conditions during Fracturing. Journal of Earth Science, 2025, 36(1): 223-232. doi: 10.1007/s12583-023-1837-z
Citation: Donghua Su, Sheng Huang, Zaoyuan Li, Jin Li, Ziyu Wang, Shizhong Tang, Hua Wu, Bo Zhao. Sealing Integrity Evaluation and Optimization of Cement Sheath-Formation Interface under Different Formation Conditions during Fracturing. Journal of Earth Science, 2025, 36(1): 223-232. doi: 10.1007/s12583-023-1837-z

Sealing Integrity Evaluation and Optimization of Cement Sheath-Formation Interface under Different Formation Conditions during Fracturing

doi: 10.1007/s12583-023-1837-z
More Information
  • Corresponding author: Sheng Huang, swpuhs@swpu.edu.cn; Zaoyuan Li, swpilzy@swpu.edu.cn
  • Received Date: 08 Jul 2022
  • Accepted Date: 09 Apr 2023
  • Available Online: 10 Feb 2025
  • Issue Publish Date: 28 Feb 2025
  • Fluid channeling caused by seal failure at the cement sheath-formation interface during fracturing is a severe problem in oil gas wells. In this study, a novel model was developed to evaluate interface sealing integrity. The model's accuracy was verified based on a self-developed interface seal evaluation device and an experiment. Subsequently, the interface seal under different formation conditions was investigated using this model. The theoretical calculation showed that for a cement sheath-carbonate formation interface, the channeling of acid-fracturing fluid caused interface seal failure and sustained casing pressure in the annulus space between the technical casing and formation. Mutual channeling between the fracturing sections occurred at the cement sheath-shale formation interface during fracturing. For a sandstone formation, the interface seal failure caused the channeling between a water-bearing formation and a sandstone formation. Aiming at different formation conditions, the mechanical properties requirements of Young's modulus and Poisson's ratio of cement sheath were proposed respectively to ensure its seal integrity. The proposed model and method can be used to evaluate and optimize sealing integrity during fracturing.

     

  • Conflict of Interest
    The authors declare that they have no conflict of interest.
  • loading
  • Bogy, D. B., 1971. Two Edge-Bonded Elastic Wedges of Different Materials and Wedge Angles under Surface Tractions. Journal of Applied Mechanics, 38(2): 377–386. https://doi.org/10.1115/1.3408786
    Bu, Y. H., Du, J. P., Guo, S. L., et al., 2020b. Effects of Formation Water Influx on the Bonding Strength between Oil Well Cement and the Formation. Construction and Building Materials, 251: 118989. https://doi.org/10.1016/j.conbuildmat.2020.118989
    Bu, Y. H., Ma, R., Du, J. P., et al., 2020a. Utilization of Metakaolin-Based Geopolymer as a Mud-Cake Solidification Agent to Enhance the Bonding Strength of Oil Well Cement-Formation Interface. Royal Society Open Science, 7(2): 191230. https://doi.org/10.1098/rsos.191230[PubMed]
    Bu, Y. H., Ma, R., Guo, S. L., et al., 2020c. A Theoretical Evaluation Method for Mechanical Sealing Integrity of Cementing Sheath. Applied Mathematical Modelling, 84: 571–589. https://doi.org/10.1016/j.apm.2020.03.001
    Chen, Y., Liang, T., Peng, X., et al., 2017. Calculation and Analysis of the First Interface Micro-Gaps of the Thermal Production Wells. Advances in Mechanical Engineering, 9(2): 168781401668858. https://doi.org/10.1177/1687814016688586
    Chu, W., Shen, J. Y., Yang, Y. F., et al., 2015. Calculation of Micro-Annulus Size in Casing-Cement Sheath-Formation System under Continuous Internal Casing Pressure Change. Petroleum Exploration and Development, 42(3): 414–421. https://doi.org/10.1016/S1876-3804(15)30033-1
    De Andrade, J., Sangesland, S., 2016. Cement Sheath Failure Mechanisms: Numerical Estimates to Design for Long-Term Well Integrity. Journal of Petroleum Science and Engineering, 147: 682–698. https://doi.org/10.1016/j.petrol.2016.08.032
    Deng, K. H., Yuan, Y., Hao, Y., et al., 2020. Experimental Study on the Integrity of Casing-Cement Sheath in Shale Gas Wells under Pressure and Temperature Cycle Loading. Journal of Petroleum Science and Engineering, 195: 107548. https://doi.org/10.1016/j.petrol.2020.107548
    Dong, W., Wu, Z. M., Zhou, X. M., 2013. Calculating Crack Extension Resistance of Concrete Based on a New Crack Propagation Criterion. Construction and Building Materials, 38: 879–889. https://doi.org/10.1016/j.conbuildmat.2012.09.037
    Fan, M. T., Li, J., Liu, G. H., 2019. Study on the Sealing Integrity of Cement Sheath during Volume Fracturing of Shale Gas of Horizontal Well. Cluster Computing, 22(2): 5009–5016. https://doi.org/10.1007/s10586-018-2469-4
    Hu, C. Y., Wang, F. J., Ai, C., 2019. A Model of Cement-Formation Interface Failure Length in Supercritical CO2-ECBM and Storage Injection Well Considering the Coal Swelling Effect under High Pressure. Journal of Petroleum Exploration and Production Technology, 9(4): 2757–2767. https://doi.org/10.1007/s13202-019-0659-0
    Jiang, T. X., Bian, X. B., Sun, C. X., et al. 2023. Key Technologies in Geology-Engineering Integration Volumetric Fracturing for Deep Shale Gas Wells. Earth Science, 48(1): 1–13. https://doi.org/10.3799/dqkx.2022.311 (in Chinese with English Abstract)
    Lecampion, B., Quesada, D., Loizzo, M., et al., 2011. Interface Debonding as a Controlling Mechanism for Loss of Well Integrity: Importance for CO2 Injector Wells. Energy Procedia, 4: 5219–5226. https://doi.org/10.1016/j.egypro.2011.02.500
    Li, J., Li, Z. Y., Tang, S. Z., et al., 2020. Mechanism for the Promotional Effect of a Novel Solidifiable Spacer Fluid System on the Cementation Quality of Cement Sheath/Formation Interface. Energy Science & Engineering, 8(12): 4212–4221. https://doi.org/10.1002/ese3.805
    Li, J., Liu, J., Li, Z. Y., et al., 2023. Influence Laws for Hydraulic Sealing Capacity in Shale Gas Well Cementing. SPE Drilling & Completion, 38(1): 120–130. https://doi.org/10.2118/212291-pa
    Li, Q. B., Lin, G., Zhou, H. J., 1991. Boundary Element Analysis of Interfacial Cracks in Different Elastic Modes and Its Application. Journal of Dalian University of Technology, 31(2): 199–204. https://doi.org/10.1007/BF02945291 (in Chinese with English Abstract)
    Li, Z. Y., Sun, J. F., Luo, P. Y., et al., 2017. Research on the Law of Mechanical Damage-Induced Deformation of Cement Sheaths of a Gas Storage Well. Journal of Natural Gas Science and Engineering, 43: 48–57. https://doi.org/10.1016/j.jngse.2017.03.026
    Li, Z. Y., Zhang, K., Guo, X. Y., et al., 2016. Study of the Failure Mechanisms of a Cement Sheath Based on an Equivalent Physical Experiment. Journal of Natural Gas Science and Engineering, 31: 331–339. https://doi.org/10.1016/j.jngse.2016.03.037
    Lian, Z. H., Yu, H., Lin, T. J., et al., 2015. A Study on Casing Deformation Failure during Multi-Stage Hydraulic Fracturing for the Stimulated Reservoir Volume of Horizontal Shale Wells. Journal of Natural Gas Science and Engineering, 23: 538–546. https://doi.org/10.1016/j.jngse.2015.02.028
    Su, D. H., Huang, S., Li, Z. Y., et al., 2022. Theoretical Study on the Hydraulic Sealing Integrity of Cement Sheath in Horizontal Shale Oil Wells under Fracturing: Crack Propagation Mode and Mechanism. Advances in Mechanical Engineering, 14(6): 16878132221104941. https://doi.org/10.1177/16878132221104941
    Su, D. H., Li, Z. Y., Huang, S., et al., 2021. Experiment and Failure Mechanism of Cement Sheath Integrity under Development and Production Conditions Based on a Mechanical Equivalent Theory. Energy Science & Engineering, 9(12): 2400–2422. https://doi.org/10.1002/ese3.994
    Wang, Y. B., Liu, K., Gao, D. L., 2021. Investigation of the Interface Cracks on the Cement Sheath Stress in Shale Gas Wells during Hydraulic Fracturing. Journal of Petroleum Science and Engineering, 205: 108981. https://doi.org/10.1016/j.petrol.2021.108981
    Wu, Z. Q., Xing, X. J., Fan, Z. L., et al., 2018. Study on Evaluation of Hydraulic Breakthrough Capability in Vertical Direction of Cementing Seal System. Journal of Chongqing University of Science and Technology (Natural Sciences Edition), 20(2): 12–16. https://doi.org/10.19406/j.cnki.cqkjxyxbzkb.2018.02.004 (in Chinese with English Abstract)
    Xi, Y., Li, J., Liu, G. H., et al., 2018. Numerical Investigation for Different Casing Deformation Reasons in Weiyuan-Changning Shale Gas Field during Multistage Hydraulic Fracturing. Journal of Petroleum Science and Engineering, 163: 691–702. https://doi.org/10.1016/j.petrol.2017.11.020
    Xia, P., Hu, X. L., Ying, C. Y., et al., 2024. Study on Shear Strength Characteristics of Basalt-Concrete Bonding Interface Based on in-situ Direct Shear Test. Journal of Earth Science, 35(2): 553–567. https://doi.org/10.1007/s12583-021-1594-9
    Xu, H. L., Ma, T. S., Peng, N., et al., 2018. Influences of Fracturing Fluid Injection on Mechanical Integrity of Cement Sheath under Four Failure Modes. Energies, 11(12): 3534. https://doi.org/10.3390/en11123534
    Xu, H. L., Zhang, Z., Shi, T. H., et al., 2015. Influence of the WHCP on Cement Sheath Stress and Integrity in HTHP Gas Well. Journal of Petroleum Science and Engineering, 126: 174–180. https://doi.org/10.1016/j.petrol.2014.11.028
    Xu, K., Yang, H. J., Zhang, H., et al., 2023. Efficient Exploration Technology of Deep Tight Gas Reservoir Based on Geomechanics Method: A Case Study of Dibei Gas Reservoir in Kuqa Depression. Earth Science, 48(2): 621–639. https://doi.org/10.3799/dqkx.2022.379 (in Chinese with English Abstract)
    Yan, Y., Guan, Z. C., Zhang, B., et al., 2021. Numerical Investigation of Debonding Extent Development of Cementing Interfaces during Hydraulic Fracturing through Perforation Cluster. Journal of Petroleum Science and Engineering, 197: 107970. https://doi.org/10.1016/j.petrol.2020.107970
    Yin, F., Han, L. H., Yang, S. Y., et al., 2018. Casing Deformation from Fracture Slip in Hydraulic Fracturing. Journal of Petroleum Science and Engineering, 166: 235–241. https://doi.org/10.1016/j.petrol.2018.03.010
    Zhang, W. C., Eckert, A., 2020. Micro-Annulus Generation under Downhole Conditions: Insights from Three-Dimensional Staged Finite Element Analysis of Cement Hardening and Wellbore Operations. Journal of Rock Mechanics and Geotechnical Engineering, 12(6): 1185–1200. https://doi.org/10.1016/j.jrmge.2020.03.003
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(7)

    Article Metrics

    Article views(12) PDF downloads(4) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return