Advanced Search

Indexed by SCI、CA、РЖ、PA、CSA、ZR、etc .

Turn off MathJax
Article Contents
Jia Wang, Wen Zhang, Donghui Chen, Han Yin, Junqi Chen. Multi-scale structural geological model and quantification of stability evaluation for a high-steep fractured rock slope. Journal of Earth Science. doi: 10.1007/s12583-023-1953-9
Citation: Jia Wang, Wen Zhang, Donghui Chen, Han Yin, Junqi Chen. Multi-scale structural geological model and quantification of stability evaluation for a high-steep fractured rock slope. Journal of Earth Science. doi: 10.1007/s12583-023-1953-9

Multi-scale structural geological model and quantification of stability evaluation for a high-steep fractured rock slope

doi: 10.1007/s12583-023-1953-9

This work was supported by the National Key Research and Development Program of China (No. 2022YFC3080200), and the National Natural Science Foundation of China (Nos. 42022053 and 41941017).

  • This study aims to evaluate the stability of a high-steep fractured rock slope on the right bank of Dongcuo River, Southeast Tibetan Plateau by establishing a multi-scale structural geological model. Multi-scale discontinuity information was first identified via the unmanned aerial vehicle photogrammetry. The multi-scale structural geological model for the cross section of the slope was established by multi-scale discontinuity processing. In particular, large-scale discontinuities were directly embedded into the model, medium-scale discontinuities were realized via discrete fracture network simulation technology, and small-scale discontinuities were implicitly considered in the equivalent rock parameter calculation. A staged scheme for searching the shortest paths of the multi-scale structural geological model via Dijkstra's algorithm was established. The searched shortest path with the largest discontinuity persistence passes the most fractures and processes the lowest shear strength, which can represent the critical slip surface (CSS). Three potential CSSs were selected for the quantification of the factor of safety (FOS) using the transfer coefficient method. Modified Jennings' criteria were proposed to estimate the equivalent shear strength of the CSS composed by rock bridges and discontinuities. Finally, FOS is calculated as 3.81, implying that the studied rock slope remains stable


  • loading
  • Bahaaddini, M., Sharrock, G., Hebblewhite, B. K., 2013. Numerical investigation of the effect of joint geometrical parameters on the mechanical properties of a non-persistent jointed rock mass under uniaxial compression. Computers and Geotechnics, 49:206-225.
    Bi, R., Ehret, D., Xiang, W., et al., 2012. Landslide reliability analysis based on transfer coefficient method:A case study from three gorges reservoir. Journal of Earth Science, 23:187-198.
    Bolla, A., Paronuzzi, P., 2019. Numerical investigation of the pre-collapse behavior and internal damage of an unstable rock slope. Rock Mechanics and Rock Engineering, 53:2279-2300.
    Bonilla-Sierra, V., Scholtès, L., Donzé, F. V., et al., 2015. Rock slope stability analysis using photogrammetric data and dfn-dem modelling.Acta Geotechnica, 10:497-511.
    Chen, D. H., 2021. Equivalent structural geomechanical model and structural stability analysis of fractured rock masses:[Dissertation], Jilin University (in Chinese with English Abstract)
    Chen, L., Zhang, W., Zheng, Y., et al., 2020. Stability analysis and design charts for over-dip rock slope against bi-planar sliding. Engineering Geology, 275:105732.
    Cui, W., Wang, X., Zhang, G., et al., 2021. Identification of unstable bedrock promontory on steep slope based on uav photogrammetry.Bulletin of Engineering Geology and the Environment, 80:7193-7211.
    Dijkstra, E. W., 1959. A note on two problems in connexion with graphs.Numerische Mathematik, 1:269-271.
    Ding, W., Zhang, C., Zhang, N., 2017. Time-History Transferring Coefficient Method of Analysis on Slope Dynamic Stability. Journal of Chongqing Jiaotong University (Natural Science), 36:61-65. (in Chinese with English Abstract)
    Einstein, H. H., Veneziano, D., Baecher, G. B., et al., 1983. The effect of discontinuity persistence on rock slope stability. International Journal of Rock Mechanics and Mining Sciences, 20:227-236.
    Fu, W., Liao, Y., 2010. Non-linear shear strength reduction technique in slope stability calculation. Computers and Geotechnics, 37:288-298.
    Gao, W., 2016. Determination of the noncircular critical slip surface in slope stability analysis by meeting ant colony optimization. Journal of Computing in Civil Engineering, 30:1-10.
    Harthong, B., Scholtès, L., Donzé, F. V., 2012. Strength characterization of rock masses, using a coupled dem-dfn model. Geophysical Journal International, 191:467-480. 1365-246X.2012.05642.x
    Hencher, S. R., 2013. Characterizing discontinuities in naturally fractured outcrop analogues and rock core:The need to consider fracture development over geological time. Geological Society, London, Special Publications, 374:113-123.
    Hoek, E., Brown, E. T., 1997. Practical estimates of rock mass strength.International Journal of Rock Mechanics and Mining Sciences, 34:1165-1186. 80069-X
    Hoek, E., Brown, E. T., 2019. The hoek-brown failure criterion and gsi-2018 edition. Journal of Rock Mechanics and Geotechnical Engineering, 11:445-463.
    Hoek, E., Kaiser, P. K., Bawden, W. F., 2000. Support of underground excavations in hard rock (1st ed.). CRC Press, Florida Huang, D., Cen, D., Ma, G., et al., 2014. Step-path failure of rock slopes with intermittent joints. Landslides, 12:911-926.
    Jennings, J. E., 1970. A mathematical theory for the calculation of the stability of open cast mines. In:Proceedings of the symposium on theoretical background to the planning of open pit mines.Johannesburg. 87-102
    Jiang, M., Jiang, T., Crosta, G. B., et al., 2015. Modeling failure of jointed rock slope with two main joint sets using a novel dem bond contact model. Engineering Geology, 193:79-96.
    Kong, D., Saroglou, C., Wu, F., et al., 2021. Development and application of uav-sfm photogrammetry for quantitative characterization of rock mass discontinuities. International Journal of Rock Mechanics and Mining Sciences, 141:104729.
    Lai, Q., Zhao, J., Huang, R., et al., 2021. Formation mechanism and evolution process of the chada rock avalanche in southeast tibet, china.Landslides, 19:331-349.
    Li, X., Liu, J., Gong, W., et al., 2022. A discrete fracture network based modeling scheme for analyzing the stability of highly fractured rock slope. Computers and Geotechnics, 141:104558.
    Li, Y., Chen, J., Zhou, F., et al., 2021. Stability evaluation of rock slope based on discrete fracture network and discrete element model:A case study for the right bank of yigong zangbu bridge. Acta Geotechnica, 17:1423-1441.
    Lin, J., Ma, R., Sun, Z., et al., 2023. Assessing the connectivity of a regional fractured aquifer based on a hydraulic conductivity field reversed by multi-well pumping tests and numerical groundwater flow modeling. Journal of Earth Science.
    Mogenstern, N. R., Price, V. E., 1965. The analysis of the stability of general slip surfaces. Géotechnique, 15:79-93.
    Ni, W., Tang, H., Liu, X., et al., 2014. Dynamic stability analysis of wedge in rock slope based on kinetic vector method. Journal of Earth Science, 25:749-756.
    Nie, Z., Chen, J., Zhang, W., et al., 2019. A new method for threedimensional fracture network modelling for trace data collected in a large sampling window. Rock Mechanics and Rock Engineering, 53:1145-1161.
    Pan, D., Li, S., Xu, Z., et al., 2019. A deterministic-stochastic identification and modelling method of discrete fracture networks using laser scanning:Development and case study. Engineering Geology, 262:105310.
    Raghuvanshi, T. K., 2019. Plane failure in rock slopes-a review on stability analysis techniques. Journal of King Saud University -Science, 31:101-109.
    Rodriguez, J., Macciotta, R., Hendry, M. T., et al., 2020. Uavs for monitoring, investigation, and mitigation design of a rock slope with multiple failure mechanisms-a case study. Landslides, 17:2027-2040.
    Sarma, S. K., 1973. Stability analysis of embankments and slopes.Géotechnique, 23:423-433.
    Schlotfeldt, P., Elmo, D., Panton, B., 2018. Overhanging rock slope by design:An integrated approach using rock mass strength characterisation, large-scale numerical modelling and limit equilibrium methods. Journal of Rock Mechanics and Geotechnical Engineering, 10:72-90.
    Scholtès, L., Donzé, F. V., 2012. Modelling progressive failure in fractured rock masses using a 3d discrete element method. International Journal of Rock Mechanics and Mining Sciences, 52:18-30.
    Shahrzad, N., Mohammad, A., 2016. Stability analysis and numerical modelling of toppling failure of discontinuous rock slope (a case study). Journal of Geotechnical Geology, 12:169-178.
    Shang, J., West, L. J., Hencher, S. R., et al., 2018. Geological discontinuity persistence:Implications and quantification. Engineering Geology, 241:41-54.
    Shanley, R. J., Mahtab, M. A., 1976. Delineation and analysis of clusters in orientation data. Journal of the International Association for Mathematical Geology, 8:9-23.
    Singh, H. O., Ansari, T. A., Singh, T. N., et al., 2020. Analytical and numerical stability analysis of road cut slopes in garhwal himalaya, india. Geotechnical and Geological Engineering, 38:4811-4829.
    Singh, J., Thakur, M., 2019. Landslide stability assessment along panchkulamorni road, nahan salient, nw himalaya, india. Journal of Earth System Science, 128:1-15.
    Singh, J., Pradhan, S. P., Singh, M., et al., 2022. Control of structural damage on the rock mass characteristics and its influence on the rock slope stability along national highway-07, garhwal himalaya, india:An ensemble of discrete fracture network (dfn) and distinct element method (dem). Bulletin of Engineering Geology and the Environment, 81:1-19.
    Spencer, E., 1967. A method of analysis of the stability of embankments assuming parallel inter-slice forces. Géotechnique, 17:11-26.
    Stead, D., Wolter, A., 2015. A critical review of rock slope failure mechanisms:The importance of structural geology. Journal of Structural Geology, 74:1-23.
    Sun, C., Chen, C., Zheng, Y., et al., 2019. Numerical and theoretical study of bi-planar failure in footwall slopes. Engineering Geology, 260:105234.
    Sun, L., Grasselli, G., Liu, Q., et al., 2022. The role of discontinuities in rock slope stability:Insights from a combined finite-discrete element simulation. Computers and Geotechnics, 147:104788.
    Tang, H., Yong, R., Ez Eldin, M. A. M., 2016. Stability analysis of stratified rock slopes with spatially variable strength parameters:The case of qianjiangping landslide. Bulletin of Engineering Geology and the Environment, 76:839-853.
    Wang, X., Xiao, Y., Shi, W., et al., 2022. Forensic analysis and numerical simulation of a catastrophic landslide of dissolved and fractured rock slope subject to underground mining. Landslides, 19:1045-1067.
    Xia, P., Hu, X., Wu, S., et al., 2020. Slope stability analysis based on group decision theory and fuzzy comprehensive evaluation. Journal of Earth Science, 31:1121-1132.
    Xia, P., Hu, X., Wu, S., et al., 2023. Study on shear strength characteristics of columnar jointed basalt based on in-situ direct shear test at baihetan hydropower station. Journal of Earth Science, 34:1280-1294.
    Xiao, S., 2018. Improved transfer coefficient method for stability analysis of a landslide with polyline slip surface. Indian Geotechnical Journal, 49:595-602.
    Yang, Y., Xu, D., Liu, F., et al., 2020. Modeling the entire progressive failure process of rock slopes using a strength-based criterion.Computers and Geotechnics, 126:103726.
    Yang, Y., Wu, W., Zhang, J., et al., 2021. Determination of critical slip surface and safety factor of slope using the vector sum numerical manifold method and max-min ant colony optimization algorithm.Engineering Analysis with Boundary Elements, 127:64-74.
    Zhang, K., Cao, P., Meng, J., et al., 2014. Modeling the progressive failure of jointed rock slope using fracture mechanics and the strength reduction method. Rock Mechanics and Rock Engineering, 48:771-785.
    Zhang, N., Li, C. C., Lu, A., et al., 2019. Experimental studies on the basic friction angle of planar rock surfaces by tilt test. Journal of Testing and Evaluation, 47:20170308.
    Zhang, W., Zhao, Q., Chen, J., et al., 2017. Determining the critical slip surface of a fractured rock slope considering preexisting fractures and statistical methodology. Landslides, 14:1253-1263.
    Zhang, W., Zhao, X., Pan, X., et al., 2022. Characterization of high and steep slopes and 3d rockfall statistical kinematic analysis for kangyuqu area, china. Engineering Geology, 308:106807.
    Zhang, W., Lan, Z., Ma, Z., et al., 2020a. Determination of statistical discontinuity persistence for a rock mass characterized by nonpersistent fractures. International Journal of Rock Mechanics and Mining Sciences, 126:104177.
    Zhang, W., Wang, J., Xu, P., et al., 2020b. Stability evaluation and potential failure process of rock slopes characterized by non-persistent fractures.Natural Hazards and Earth System Sciences, 20:2921-2935.
    Zhou, J., Wang, J., 2017. Lower bound limit analysis of wedge stability using block element method. Computers and Geotechnics, 86:120-128.
    Zhou, X. P., Huang, X. C., Zhao, X. F., 2020. Optimization of the critical slip surface of three-dimensional slope by using an improved genetic algorithm. International Journal of Geomechanics, 20:04020120.
  • 加载中


    通讯作者: 陈斌,
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views(100) PDF downloads(41) Cited by()
    Proportional views


    DownLoad:  Full-Size Img  PowerPoint