| Citation: | Jun Wei, Xiwu Zhou, Yu Zhu, Xin Luo. A Combined-Power Model for the Distribution of Axial Force in Shaft Anchor along Its Length. Journal of Earth Science, 2006, 17(1): 89-94.
|
The theoretical results of axial force distribution models differ greatly from tests because of the complication of the rock type material. A three-parameter combined-power model is proposed by curves fitting the test data recorded from the pull tests on anchoring bars used in different engineering projects. Based on the comparison of the mechanical characteristics of shaft anchors and prestressed tendons, a two-parameter combined-power function model for prestressed tendons is proposed. The bounded length derived from the model and the suggested values of the parameters are also proposed. Compared with the Gaussian model, the three-parameter combined-power model is more precise and simple in expression. Results also suggest that the bounded length calculated from the average stress method is not safe enough.
| Briaud, J. L., Lim, Y. J., 1999. Tieback Walls in Sand: Numerical Simulation and Design Implications. Journal o f Geotechnical and Geoenvironmental Engineering, 125(2): 101-106 doi: 10.1061/(ASCE)1090-0241(1999)125:2(101) |
| Cao, G. J., Jiang, H. D., Xiong, H. M., 2003. Calculation Method of Support Length for Stretched Bolts. Chinese Journal of Rock Mechanics and Engineering, 22(7): 1141-1145(in Chinese with English Abstract) |
| Fu, Z. X., Mei, M. R., Zhang, L. J., et al., 1999. Analysis and Design of Anchor Rodes of Large Ship Lock Wall. China Civil Engineering Journal, 32(1): 60-65(in Chinese) |
| Jiang, Z. X., 2001. A Gauss Curve Model on Shear Stress along Anchoring Section of Anchoring Rope of Extensional Force Type. Chinese Journal of Geotechnical Engineering, 23(6): 696-699(in Chinese) |
| Li, M., Jiang, Z. X., Qin, X. L., 1995. Stress Test Study on Expansive Rock (Soil) on Nankun Railway Side Slope. The Chinese Journal of Geological Hazard and Control, (Suppl. ): 60-69(in Chinese) |
| Liao, H. J., Ou, C. D., Shu, S. C., 1996. Anchorage Behavior of Shaft Anchors in Alluvial Soil. Journal o f Geotechnical Engineering, 122(7): 526-533 doi: 10.1061/(ASCE)0733-9410(1996)122:7(526) |
| Lu, S. L., Tang, L., Yang, X. N., 1998. Anchoring Force of Anchoring Bolt and Anchoring Technology. Coal Industry Publishing House, Beijing(in Chinese) |
| The Rock Anchoring Technology Branch of Chinese Committee of Rock Mechanics and Engineering, 1999. Manual of Anchorage and Grouting Techniques. Chinese Electric Power Publishing House, Beijing(in Chinese) |
| Xue, S. Y., Liu, H. D., 2002. Perspective on the Characteristics of Rockmass Engineering. Yellow River Water Conservancy Press, Zhengzhou(in Chinese) |
| You, C., 2000. Mechanical Analysis on Wholly Grouted Anchor. Chinese Journal of Rock Mechanics and Engineering, 19(3): 339-341(in Chinese with English Abstract) |
| Zhu, J. B., Han, J., Cheng, L. K., et al., 2002. Research on Rockmass Properties near Anchor with Prestressing for TGP's Permanent Shiplock. Chinese Journal of Rock Mechanics and Engineering, 21(6): 853-857(in Chinese with English Abstract) |
Figures(4) / Tables(3)
Copyright © 2013-2020 Journal of Earth Science 鄂ICP备15021562号-2
Tel: +86-27-67885075 Fax: +86-27-67885075 E-mail: xbb@cug.edu.cn
Address: Editorial Office of Journal, China University of Geosciences, Yujiashan, Wuhan, Hubei 430074, P. R. China
Supported by:
Beijing Renhe Information Technology Co. Ltd
E-mail:
info@rhhz.net
DownLoad:
